If your Appliances were pre-configured prior to delivery, skip to Step 4: Connect the Appliance to your network. Otherwise, perform the following procedure on the HA Appliance, DR Appliance, and if applicable, DR Mirror.
Perform the following steps on all Appliances, including the HA Appliance, DR Appliance and, if applicable, the DR Mirror.
|
1.
|
Use a standalone computer with an available Ethernet port and configure the IP address to 169.254.2.99 and net mask 255.255.255.0.
|
|
3.
|
Log on to the onQ Portal with user ID VARAdmin. Contact Quorum Support for the default password. If you are prompted to clear the EULA acceptance, click Yes.
|
|
4.
|
For security purposes, change both the default VARAdmin and Admin passwords. Go to Change user passwords.
|
|
a.
|
The Modify Local onQ Setup page appears.
The Modify Remote onQ Setup page appears.
Click MODIFY and set the parameters, including networking information, DR mirroring, and bandwidth limits, then SAVE.
The Set Up Remote Trust page appears.
|
a.
|
You must set up the HA‑to‑DR link. If you have a DR Mirror, set up the DR‑to‑Mirror link too. For more information, go to Set up trust relationships. 
|
b.
|
|
11.
|
