Reboot onQ Manager

Some software upgrades require that you reboot the virtual machine on which the onQ Manager depends. In doing so, all processes managed by the onQ Manager are restarted. The underlying hypervisor, however, is not affected.

A reboot temporarily stops protection. However, onQ Manager returns the onQ Appliance to its original protection state after the reboot:

•	If protection was on prior to the reboot, onQ Manager turns on protection after the reboot.

•	If protection was off prior to the reboot, onQ Manager does not turn on protection after the reboot.

To reboot the onQ virtual machine:

1.	Log on to the onQ Appliance’s onQ Portal.

2.	Select the pull-down menu.

3.	Choose Reboot onQ.

4.	Click Continue to initiate the reboot.

5.	After the onQ Manager reboots, verify that protection is on.

v3.6 HF2